Results for era 2 hooks 2 rollers split spindle multipoint lock

12345Next

Era 2 Hooks 2 Rollers Split Spin...

Meeting the multipoint lock requirements set out by Secured By Design, PAS23 & PAS24 this lock has been manufactured by the long-standing manufacturer ERA, who produce a vast range of high quality affordable locking security solutions in the UK.The two hookbolts on this multipoint lock throw in...



Click For Info
Winkhaus Scorpion 3 Hooks, 2 Rol...

The Scorpion multipoint lock by Winkhaus offers a tri-hook configuration with additional rollers for extra support. This three-hook & two-roller configuration means you have five locking points when including the hookbolt on the centre gearbox. This scale of multi-point locking is widely considered...



Click For Info
Era 2 Hooks Split Spindle Multip...

Achieving compliance with Secured by Design, PAS23 and PAS24, this multipoint lock by ERA is a simple yet high security multipoint locking solution for your uPVC doors. These plastic doors can flex quite a bit more than standard wooden doors, so it is important to have a good multipoint lock that...



Click For Info
Avocet 2 Hooks 4 Rollers Split S...

The 2 hook and 4 roller model offers a superior grip into the frame than the standard 2 hook or 2 hook & 2 roller models, as while roller cams alone are not considered high security, as an addition to hook locking points, they ensure a rigid fit into the keep-side of the frame, minimising any weak...



Click For Info
Maco 2 Hooks, 2 Rollers Split-Sp...

These locks are now discontinued...



Click For Info
FUHR 859 2-Hook, 2-Roller Split ...

The Fuhr 859 is a split-spindle multipoint lock offering a two-hook, two-roller setup on the locking strip, as well as a central latch and deadbolt. This creates a 5-point locking solution for uPVC doors and other multipoint type doors whether it\'s timber or composite. Designed to work with a...



Click For Info
LockMaster 2 Hooks, 2 Anti Lift ...

This is the split spindle version of the anti-lift hook & roller mutlipoint lock by LockMaster. The difference between this lock and its standard version, is that there are two followers allowing for split-spindle functionality. The easiest way to know if this is something you have, is by looking...



Click For Info
ERA 2-Hook, 2-Roller Split Spind...

The ERA 6635 is approved under the Secured By Design standard, as well as PAS23 and PAS24. This is a hook-based multipoint lock, offering three hooks in total, the two-hook locking strip and the centre gearbox hookbolt.. Coupled with this are two roller cams, which offer additional security to the...



Click For Info
Era Latch and Deadbolt Split Spi...

Era Latch Multipoint Gearbox is a euro profile lock case and has a latch & deadbolt operation, this case has a split spindle which can be used on front doors to prevent the door from being opened from the outside without a key. Please note this item is Centre Gearbox OnlyOPERATIONLockingLift lever...



Click For Info
Era Latch and Hookbolt Split Spi...

Era Latch Multipoint Gearbox is a euro profile lock case and has a latch & hookbolt operation, this case has a split spindle which can be used on front doors to prevent the door from being opened from the outside without a key. Please note this item is Centre Gearbox OnlyOPERATIONLockingLift lever...



Click For Info
Avocet 2 Hooks 2 Rollers Twin Sp...

This is another of Avocet\'s 2 hook & 2 roller configurations of multipoint locks, offering a standard 35mm backset with split-spindle functionality at 92mm and 62mm. Set on a standard 16mm rail, these locks are designed for uPVC doors and are used less on new installations now but due to their...



Click For Info
Avocet 4 Rollers Split Spindle U...

This Avocet lock has no deadbolts or hooks, it purely offers rollers covering the full length of the rail. The rail itself is 16mm wide and is a flat profile (not a u-rail type strip). Offering split spindle functionality, the PZ centres on these locks are 92mm and 62mm as standard. Following this...



Click For Info
Avocet 2 Deadbolts 4 Rollers Spl...

The Avocet deadbolt and roller multipoint lock was originally designed in 28mm and 35mm backset models; however they are now only available in their 35mm models. If you are in the rare situation where you need to replace a 28mm backset model, this is still possible with minimal modification by...



Click For Info
Fullex SL16 2 Deadbolts Split Sp...

The SL16 is a multi-deadlock type multipoint lock designed for uPVC doors, composite doors, and timber doors thanks to its diverse range of sizes and widths. Available in both 16mm and 20mm faceplates; the 16mm model is typically used on uPVC doors, as this 16mm rail slots neatly into the...



Click For Info
Avantis 2-Hook & 2-Rollers Twin ...

Fitted with an additional two roller cams for added grip into the frame offering better draught sealing and further support for your door security, the Avantis 2 hook & 2 roller multipoint door lock is designed for uPVC doors. It can be used on other multipoint locking doors such as modern timber...



Click For Info
Era Vectis 5-Lever Multipoint Lo...

This is the famous ERA Vectis lever-operated multipoint lock, with split spindle operation and a reversible latch. Where this lock differs from most multipoint locking solutions, is that it does not utilise a euro cylinder for the locking operation. Instead it uses traditional lever type keys in...



Click For Info
Era Vectis 5-Lever Multipoint Lo...

The beloved ERA Vectis 5-lever multipoint lock is available with a 16mm faceplate for uPVC doors, or 20mm faceplate designed for wooden and composite doors. Still with split spindle operation and a reversible latch, and of course no euro cylinder for the locking operation; this is exactly the same...



Click For Info
Winkhaus Cobra Split-Spindle 2 H...

The Winkhaus Cobra series is a split-spindle 92mm PZ multipoint lock, offering a top and bottom hookbolt configuration with a central latch and deadbolt. It is available in both 35mm and 45mm backset models, with reversible handing. Standard lever operation allows you to engage the hooks and...



Click For Info
LockMaster 2 Deadbolts Latch & D...

This is the split-spindle version of the top, bottom & centre deadbolt multipoint lock from LockMaster. While this is called a two-deadbolt multipoint, due to the centre gearbox also offering a latch and deadbolt, this complete multipoint lock solution offers three deadbolts in total, along with a...



Click For Info
Vitawin 2 Hooks, 2 Rollers Lever...

With a 35mm backset and 92mm pz gearbox set on a 16mm rail, this is a classic uPVC multipoint lock setup. Offering 2 hooks, 2 rollers, and a central deadlock & latch, you have plenty of locking points here that will provide your door with a solid and secure grip into the frame when locked. To...



Click For Info
ERA, Saracen, Fab & Fix and Home...

This model can be identified by the markings on the strip of Era, Saracen, Surelock, Fab & Fix or Homesafe. This UPVC multipoint lock gearbox will retro fit these models as long as your critical measurements match up. The Era Multipoint lock Gearbox is available in 35mm (UPVC) and 45mm (Composite,...



Click For Info
Fullex SL16 Reversible Latch Dea...

The latch on the Fullex SL16 multipoint lock gear box is easily reversible, requiring only one screw to be loosened, allowing it to be reversed. It also has split spindle functionality, which allows dual functions from either side of the door instead of the standard handle to handle style. This...



Click For Info
ERA 2-Deadbolt Electronic Multip...

The ERA electronic multipoint lock is ideal for incorporating access control on uPVC doors. Rather than weakening your security with a strike release, these motorised locks allow you to lock and unlock the full multipoint solution via a keypad, card reader, fob or even a fingerprint reader! The...



Click For Info
Fullex XL Crimebeater Offset 2 A...

This multipoint lock in fact offers three hooks in total, designed with an opposing bi-directional arrangement for added security. They are classed as a 2-hook multipoint purely because it has two remote hooks at the top and bottom of the locking rail, but this one does in fact have a hookbolt at...



Click For Info
ERA Vectis 5 Lever Reversible La...

This model is a 5 lever version of multipoint lock gearbox which gives additional protection against attack with its locking mechanism and anti-drill plates. The Era - Vectis 5 lever - Multipoint lock gearbox is available in two backset sizes, 35mm (Standard UPVC) and 45mm (Composite, Timber). It...



Click For Info
Fullex XL Reversible Latch Hookb...

This model is the Fullex XL Multipoint that is a suitable replacement for older gearboxes with matching critical measurements. This gearbox has a holdback feature which allows the latch to be held back, temporarily allowing free access. The PZ centre measurements on these models can be either 62mm...



Click For Info
Fullex Crimebeater 2 Hook Twin S...

The Crimebeater range by Fullex is designed as a high security multipoint lock, certified to established security standards for multipoint locking solutions. Not only has this lock achieved compliance with the police-approved Secured by Design standard, but has also been UKAS tested to meet PAS24...



Click For Info
Fullex XL Crimebeater Offset 2 A...

With an additional central hookbolt, this multipoint lock in fact offers three hooks in total, designed with an opposing bi-directional arrangement for added security. With many features being passed over from the ever popular SL16 Crimebeater lock, including the police-approved Secured by Design...



Click For Info
Fullex XL Crimebeater 2 Anti-Lif...

With a total of three hooks now thanks to the introduction of a central hookbolt, the XL Crimebeater series is an improvement on the popular SL16 models. With most features being brought over from the still immensely popular SL16 multipoint lock, including the police-approved Secured by Design...



Click For Info
FUHR 855-2 2 Mushrooms & 2 Rolle...

The Type 2 Fuhr 855 is key-operated for both locking and unlocking; this method is often referred to as a \'wind up\' lock. This makes them suitable for use with electronic strike releases on uPVC doors! Key-wind operation - as mentioned above - allows you to control the full multipoint lock via...



Click For Info
Winlock 6-Hook Multipoint Lock f...

Sliding doors such as patio doors require a hooking type lock mechanism in order to secure the door, as logically this is the only way to prevent the door from being opened. This multipoint lock has been designed with this in mind, offering a total of six hooks, situated in opposing directions...



Click For Info
Sprung Half-Spindles for Split-S...

If you have a split spindle gearbox that allows for different functionality on the operation of each handle (ie, outside can lift the handle to lock, but cannot operate the latch for free entry etc), then these are the type of spindles your lock will most likely need in order to operate. These 8mm...



Click For Info
Fullex OLD STYLE uPVC Door Multi...

This is a Fullex Old-Style replacement gearbox, this was a very popular style around in the early days of multipoint locking, and these gearboxes can wear out over time. So rather than replacing the whole multipoint lock, in most cases you can simply replace the gearbox where there\'s no visible...



Click For Info
GU Automatic Motorised Electric ...

GU has come up with a range of electrically operated locks that can work on UPVC and wooden multipoint locking systems. Finally a complete purpose-made solution to access control on your plastic uPVC doors. This multipoint lock has a unique ability to be controlled electrically. When it comes to...



Click For Info
Yale PAS8621 Multipoint Lock for...

This is the Yale PAS8621 multipoint lock. This series of multipoint locks has been well established in the industry for some time now, and this is an important addition for the Doormaster range. Combining this new PAS8621 standard with all the qualities the Doormaster range we\'re all familiar with...



Click For Info
FUHR 855-3 2 Hook, 2 Roller Key-...

This is the Type-3 Fuhr 855 multipoint lock. Commonly named a \'wind up lock\', the gearbox offers complete key-operation without the need for handles. These are a common solution to putting access control on uPVC doors because the key operation allows you to use a strike release and remove the...



Click For Info
8mm Split Spindle

These spindles are split into two parts, both equal lengths, but with a central pin connecting them together, allowing each half to rotate independently. This allows for important functionality offered by split spindle gearboxes, where the external handle operates differently to the internal...



Click For Info
Winkhaus Replacement Motor for A...

If you\'re looking for a replacement motor for a broken Winkhaus AV2E / Bluematic electric multipoint lock, or just want to keep a spare motor on your shelf to future-proof your access control solution, then the AV2 Motor is available for purchase here on its own - you don\'t need to replace the...



Click For Info
Mila No-Centre Deadbolt Multipoi...

The Mila No-Centre Deadbolt is a unique non-central deadbolt uPVC multipoint lock gearbox for reppairing faulty or worn-out upvc door locks. This model is available in 25mm, 28mm and 35mm backsets. This is the measurement from the edge of the faceplate to the centre of the keyhole. The latch on...



Click For Info
Kenrick Excalibur Reversible Lat...

These models can be indentified with the marking \"Excalibur\" which can be found on the strip of the multipoint lock. A holdback facility can also be found here, this allows temporary free access through the door until the snib is pushed back into the off position. The PZ measurement for the...



Click For Info

12345Next