Results for pocketwizard flextt5
The Nikon dedicated Pocket Wizard FlexTT5 Transceiver, with its built in hot-shoe and ControlTL firmware, is the perfect addition to Nikon i-TTL II flash systems. The FlexTT5 takes the existing benefits of Nikon wireless systems beyond the boundaries of infrared technology. When paired with the...
Click For Info
The Canon dedicated Pocket Wizard FlexTT5 Transceiver, with its built in hot-shoe and ControlTL firmware, is the perfect addition to Canon E-TTL II flash systems. The FlexTT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology. When paired with the...
Click For Info
Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Nikon locks onto the camera\'s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to...
Click For Info
Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Canon locks onto the camera\'s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to...
Click For Info
The PocketWizard TTL 4-Pack is the ideal solution to compliment your existing FlexTT5 or MiniTT1, to expand your lighting control. Consisting of 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The FlexTT5 transceivers can be attached to off-camera flashes or lights, to allow...
Click For Info
The PocketWizard TTL 4-Pack is the ideal solution to compliment your existing FlexTT5 or MiniTT1, to expand your lighting control. Consisting of 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The FlexTT5 transceivers can be attached to off-camera flashes or lights, to allow...
Click For Info
The PocketWizard S-RMS1AM-P Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilise the RMS1AM electronic cable release connection from a PocketWizard Plus III, TT5 or MultiMAX transmitter. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required...
Click For Info
The PocketWizard TTL 5-Pack is the ideal start point to expand your lighting control. Consisting of a MiniTT1 transmitter; 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The MiniTT1 transmitter can be used to trigger remote E-TTL speedlites or studio flashes that have the...
Click For Info
The PocketWizard TTL 5-Pack is the ideal start point to expand your lighting control. Consisting of a MiniTT1 transmitter; 2 x FlexTT5 Transceivers; an AC3 ZoneController; and a G-Wiz Uber bag. The MiniTT1 transmitter can be used to trigger remote E-TTL speedlites or studio flashes that have the...
Click For Info
Pre-Trigger Remote Cable fFor connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal. Cable length: 3\' (91 cm)From 1/8\" (3.5 mm) Stereo MiniphoneTo Sony or Minolta remote shutter release terminalPocketWizard Compatibility:? PlusX? Plus...
Click For Info
The Pocket Wizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the FlexTT5 radio transceiver when operated using the Canon 580EX, 580EX II and 430EX flashes, caused by interference emanating from the flashes. The AC7 is a hard plastic shield with a special RF coating that...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
The PocketWizard CM-N3-ACC Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC cable contains...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
The PocketWizard G-Wiz Squared Case provides perfect protection for up to four of the PocketWizard Plus III radio triggers. The movable padded dividers allow you to customise the interior to fit any combination of PocketWizard products including MiniTT1, FlexTT5, Plus II, Plus III or MultiMax, plus...
Click For Info
The PocketWizard CM-N3-ACC-1 Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC-1 cable...
Click For Info
The Pocket Wizard AC5 RF Soft Shield is a simple solution to reduce interference and improve performance of the FlexTT5 Transceiver. Special RF fabric and a shoe filter shields the FlexTT5 Transceiver from RF noise emitted by some Canon Speedlites (580EX II, 580EX and 430EX). The Canon 550EX, 270EX...
Click For Info
Protect your PocketWizards from potential scuffs and knocks with this handy case. It provides padded protection for two FlexTT5\'s and a MiniTT1 or two Plus or MultiMAX PocketWizard Radios. There\'s even room for some batteries, cables or quickguide and there is a cool little PocketWizard carabiner...
Click For Info
The PocketWizard N10-ACC (previously N90M-ACC-ND) Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR\'s cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if...
Click For Info
The PocketWizard AC9 AlienBees Adapter for Canon allows remote control of AlienBees and White Lightening flash heads as well as Zeus power packs when used with a PocketWizard MiniTT1 transmitter or FlexTT5 transceiver. This version is dedicated for use with Canon cameras only....
Click For Info
The PocketWizard S-RMS1AM-ACC-1 Remote Accessory Cable is a 30cm cable used to connect a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press...
Click For Info
The PocketWizard N10-ACC-1 Remote Accessory cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon 10-Pin Remote Shutter Terminal remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function...
Click For Info
The PocketWizard CM-E3-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Canon E3 remote terminal or sub miniphone (3/32\" or 2.5 mm) and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and...
Click For Info
The PocketWizard NMCDC2-ACC-1 Remote Accessory Cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon MC-DC2 remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera\'s...
Click For Info
The PocketWizard NM4-ACC Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR\'s cameras equipped with a 4 pin Remote Terminal (except D70). It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL...
Click For Info
The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera\'s position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your...
Click For Info
The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera\'s position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your...
Click For Info
The body of the Pocket Wizard AC7 shield is made with a material that effectively blocks RF interference (EMI) from clouding the FlexTT5 antenna. To block noise traveling through connections in the hot shoe, an electronic filter has been added to a hot shoe built into the AC7. With two ¼-20...
Click For Info
Pre-Trigger Remote Cable for connecting a Plus II or MultiMAX with no ACC port to a Sony or Minolta remote shutter release terminal, through a Pre-Trigger switch. Cable length: 3\' (91.5 cm)From 1/8\" (3.5 mm) Mono MiniphoneVia Pre-Trigger SwitchTo Sony or Minolta remote shutter release terminal...
Click For Info
The AC3 ZoneController for Canon is the gem of the ControlTL® product line. Add it to your on-camera MiniTT1® Transmitter or FlexTT5® Transceiver and you instantly have three zones of flash control. Whether working in E-TTL II, CLS/i-TTL or Manual mode, you now have control over all your...
Click For Info
The PocketWizard PW-DC-N10 Power Cable is designed for use with the PocketWizard MiniTT1 Transmitter, the Plus III and MultiMAX (version with USB port) Transceivers and any Nikon Digital Single-Lens Reflex (DSLR) camera equipped with a Nikon 10-pin remote terminal. This cable provides a...
Click For Info
The PocketWizard PlusX Transceiver is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. Whether you are new to off-camera flash or an experienced pro looking to expand upon an existing PocketWizard system the PlusX is the perfect choice. Simply attach...
Click For Info
The PocketWizard PlusX Transceiver is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. Whether you are new to off-camera flash or an experienced pro looking to expand upon an existing PocketWizard system the PlusX is the perfect choice. Simply attach...
Click For Info
The PlusX is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusX to your camera, another PlusX to a remote flash using an included cable, set both radios to the same channel and start taking pictures. The PlusX is compatible...
Click For Info
The PocketWizard SMFMS Adapter is a reducer adapter, with a 3.5mm stereo miniphone input (female) and a 2.5mm jack (male). It can be used to adapt a PocketWizard miniphone sync cable like the MM1, MM3 or MM6 to electronic flashes equipped with a 2.5mm (3/32\") sub miniphone sync terminal.
Click For Info
The PocketWizard G-Wiz Vault Case is designed for those photographers with multiple PocketWizard radio transceivers. It can carry up to six MultiMAX\'s, Plus II\'s or Plus III\'s, or ten Flex TT1/5\'s. Available in a choice of three colours, black, orange or blue it can also be used to carry a...
Click For Info
The PocketWizard MPCF-L PC to Miniphone Adapter is used to adapt a PC sync cable to a PocketWizard radio unit: A PC terminal to 1/8\" (3.5 mm) mono miniphone. Compatible with long tip, locking, and standard non-locking sync cords. This adapter does have receiving locking threads.
Click For Info
The PocketWizard G-Wiz Vault Case is designed for those photographers with multiple PocketWizard radio transceivers. It can carry up to six MultiMAX\'s, Plus II\'s or Plus III\'s, or ten Flex TT1/5\'s. Available in a choice of three colours, black, orange or blue it can also be used to carry a...
Click For Info
PocketWizard\'s PC1N Mono Miniphone to Locking PC Cable is used to adapt any sync cable to a PocketWizard radio.
Click For Info
