Results for power tec power tec large arch hook
Power-tec Power-tec - Large Arch Hook
Power-tec Power-tec - Large Arch Hook: Ideal for repairing dents in wheel arches on larger vehicles, this large arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring two different pulling faces, offering a choice or curvature to fit most wheel arches. With it's 1.5 ton pulling capacity, this hook is also useful for radiator supports, tail light openings or any lightweight panel pulling tasks.
Power-tec Power-tec - Airopower Bit Hook
Power-tec Power-tec - Airopower Bit Hook: Lightweight bit hook manufactured to be used with the Power-Tec AiroPower system.
Power-tec Power-tec - Large Rubber Pad
Power-tec Power-tec - Large Rubber Pad: A replacement large rubber pad for the Power-Tec Miracle system, specifically the single short line puller tool. Manufactured to protect both automotive bodywork and the tools itself from unnecessary and expensive damage.
Power-tec Power-tec - Monster Slide Hammer Kit
Power-tec Power-tec - Monster Slide Hammer Kit: At 7.5kg, the Monster Slide Hammer from Power-Tec is the heaviest of it's kind on the market today. Complete with various attachments for heavy repair work and controlled hammering. Included in the kit is straight & off-set 600mm long hammer extensions with 3 sizes of hammer heads, allowing for work in hard to reach areas. Also included are 5 sizes of heavy duty hook, straight and curved lip pullers, flexible connector and chain hook up plate for use with any pulling system.
Power-tec Power-tec - One Hook Chain
Power-tec Power-tec - One Hook Chain: A durable heat treated steel grade 80 chain, complete with one hook, ideal for a wide range of applications, including automotive bodywork pulling work.
Power-tec Power-tec - Handy Hook
Power-tec Power-tec - Handy Hook: This handy little hook hooks straight onto bodywork clamps and takes up chain slack to shorten the chain length to suit your requirements and keep it out of the way of the work area.
Power-tec Power-tec - Airopower Standard Unit
Power-tec Power-tec - Airopower Standard Unit: The AiroPower from Power-Tec is a high power, high quality unit, ideal for all manner of automotive body work repairs. Capable of pushing or pulling up to 5.5 tons, yet compact enough to be operated single handedly, this is a must have for any automotive workshop. It can push or pull out large dents in body panels all around a vehicle and thanks to the supplied rubber pads and oil free, air operation there is no risk of further damage to body work, or interiors. An all round fantastic bit of...
Power-tec Power-tec - Maxi 6 Ton Self-lok Clamp
Power-tec Power-tec - Maxi 6 Ton Self-lok Clamp: By eliminating the need to bolt the clamp to the panel needing repair, this self locking clamp speeds up pulls and saves valuable hook up time, meaning you can get the job done easily and quickly. The jaws are tightened by simply turning the pulling eye, helping to avoid clamp slipping, while the sprung wedge action ensure a continuous hold during the pull. A real time and effort saver.
Power-tec Power-tec - 58100s Tec Spot
Power-tec Power-tec - 58100s Tec Spot: Producing a professional grade finish ideal for any automotive workshop, the Tec Spot from Power-Tec is a comprehensive kit manufactured for the easy removal of dents and damage to automotive bodywork. Complete with everything you need for quick and easy dent pulling, the Tec Spot includes squigley wire, pulling pins, electrode accessories, earth and a slide hammer. Simply weld on the pulling pins and use the slide hammer to gently pull and massage the dents out of the bodywork, leaving a...
Power-tec Power-tec - Holder For 3 Point Electrode
Power-tec Power-tec - Holder For 3 Point Electrode: This 3 point electrode holder is a spare part for the Power-Tec Panel Medic panel repair kit which is used with spot welders or Power-Tec's Tec-Spot system for the easy removal of body panel dents and damage.
Power-tec Power-tec - Slide Hammer For Tec Spot Kit
Power-tec Power-tec - Slide Hammer For Tec Spot Kit: Replacement slide hammer for the Power-Tec Tec Spot bodywork repair kit.
Power-tec Power-tec - Glue Pads (6 Pack)
Power-tec Power-tec - Glue Pads (6 Pack): For use with the Power-Tec Gluematic Glue Gun, these glue pads are ideal for a wide range of applications and for being used with the Power-Tec glue puller system. In a pack of six these are great value for money.
Power-tec Power-tec 91643 - 50 Cma135t 1.5mm Twisted Aluminium Bits
Power-tec Power-tec 91643 - 50 Cma135t 1.5mm Twisted Aluminium Bits: A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec 91638 - 50 Cma132 1mm Aluminium Bits
Power-tec Power-tec 91638 - 50 Cma132 1mm Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - Small Rubber Pad
Power-tec Power-tec - Small Rubber Pad: A replacement small rubber pad for the Power-Tec Miracle system, specifically the Double Short Foot tool. Manufactured to protect both automotive bodywork and the tools itself from unnecessary and expensive damage.
Power-tec Power-tec 91640 - 50 Cma134 1mm Aluminium Bits
Power-tec Power-tec 91640 - 50 Cma134 1mm Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - Glue Sticks
Power-tec Power-tec - Glue Sticks: A pack of 15 REACH certified glue sticks manufactured for use with glue dent pulling systems, including the Power-Tec glue pulling system. Consumable item.
Power-tec Power-tec 91637 - 50 Cma131t 1.5mm Twisted Aluminium Bits
Power-tec Power-tec 91637 - 50 Cma131t 1.5mm Twisted Aluminium Bits: A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - 11 Piece Master Dolly Spoon Set
Power-tec Power-tec - 11 Piece Master Dolly Spoon Set: A comprehensive kit ideal for the professional automotive bodyshop, the master dolly spoon set from Power-Tec comes complete with a wide range of spoons, files and dollies manufactured for use on various panels around a vehicle and for various bodywork repair applications. A great value complete package, this set even comes with a useful heavy duty steel case for storage and organisation.
Power-tec Power-tec 91641 - 50 Cma134t 1mm Twisted Aluminium Bits
Power-tec Power-tec 91641 - 50 Cma134t 1mm Twisted Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.