Results for power tec power tec multi clamp
Power-tec Power-tec - Multi Clamp
Power-tec Power-tec - Multi Clamp: Perfect for pulling at any angle, this Power-Tec multi clamp is ideal for applications all around the vehicle. With a 120mm wide jaw and supplied with a Vario Clamp & Pull Set and a Rota Arm.
Power-tec Power-tec - Panel Clamp Kit
Power-tec Power-tec - Panel Clamp Kit: For use in confined spaces such as door openings this panel clamp kit is a fantastic alternative to welding clamps. Easy to use, this comprehensive set does the same job as welding clamps, but doesn't require tacking before use, as the kit simply holds panels together in a secure grip ready for welding. Complete with clamps of varying sizes and level for hammering into place and removing clip after welding.
Power-tec Power-tec - Grip On Welding Clamp Set (5 Pack)
Power-tec Power-tec - Grip On Welding Clamp Set (5 Pack): A useful set of 5 welding clamps of varying shapes, manufactured to clamp panels together allowing for safe, accurate welding. Complete with a JJ Clamp, W Clamp, LL Clamp, J Clamp and L Clamp. All are fitted with a quick release catch for ease of use and for avoiding damage to the user's hands.
Power-tec Power-tec - 35mm Midget Clamp
Power-tec Power-tec - 35mm Midget Clamp: This handy Midget Clamp from Power-Tec is has a 35mm wide jaw and is small enough to be used in hard to reach, tight areas, yet it still boasts a 4 ton pull capacity, making it ideal for various automotive damage repair jobs.
Power-tec Power-tec - Gf9 Welding Clamp
Power-tec Power-tec - Gf9 Welding Clamp: Ideal for all general bodywork, this 'U' welding clamp from Power-Tec has deep jaws for maximum access to the work area.
Power-tec Power-tec 92299 - 5 Piece Midget Panel Clamp Set
Power-tec Power-tec 92299 - 5 Piece Midget Panel Clamp Set: Power-Tec 92299 - 5 Piece Midget Panel Clamp Set.
Power-tec Power-tec - Maxi 6 Ton Self-lok Clamp
Power-tec Power-tec - Maxi 6 Ton Self-lok Clamp: By eliminating the need to bolt the clamp to the panel needing repair, this self locking clamp speeds up pulls and saves valuable hook up time, meaning you can get the job done easily and quickly. The jaws are tightened by simply turning the pulling eye, helping to avoid clamp slipping, while the sprung wedge action ensure a continuous hold during the pull. A real time and effort saver.
Power-tec Power-tec 100mm Right Angle Clamp
Power-tec Power-tec 100mm Right Angle Clamp: A right angle clamp with 6 ton pulling capacity, ideal for straight and right angle pulls and for use with body pulling equipment.
Power-tec Power-tec - Pulling Yoke
Power-tec Power-tec - Pulling Yoke: Simple to use, this pulling yoke is ideal for use with pulling straps or chains and is great for various automotive bodywork pulling applications. Simply slip the pin into the back of the clamp and set up the pull. Can be used with a pulling clamp or on its own.
Power-tec Power-tec - Gf2 Welding Clamp
Power-tec Power-tec - Gf2 Welding Clamp: 'W' Style welding clamp, great for single sided spot and MIG welding.
Power-tec Power-tec - Gf32 Long Reach Welding Clamp
Power-tec Power-tec - Gf32 Long Reach Welding Clamp: Long reach welding clamp ideal for a wide range of welding applications involved in bodywork repair. Deep reach and wide opening for working around various obstacles.
Power-tec Power-tec - Gf4 Welding Clamp
Power-tec Power-tec - Gf4 Welding Clamp: 'J' welding clamp, manufactured for use on flanged lap joints. With 0-15mm adjustment.
Power-tec Power-tec - Gf20 Welding Clamp
Power-tec Power-tec - Gf20 Welding Clamp: 'c' Style welding clamp, with 300mm extra wide working width for working around awkward objects.
Power-tec Power-tec - Gf2000 Micro Welding Clamp
Power-tec Power-tec - Gf2000 Micro Welding Clamp: Small and versatile, this micro welding clamp works like any other, yet it can be used in areas were regular sized clamps are not able to operate. Designed for single handed operation for increased welding accuracy and safety, this is perfect for positioning and fixing panels securely for welding, wherever and whenever needed.
Power-tec Power-tec - Plug Weld Pliers
Power-tec Power-tec - Plug Weld Pliers: For use during MIG welding, these plug weld pliers from Power-Tec provide the user with even better weld penetration and don't allow burning through even thin panels when welding. They clamp and support the weld area for greater accuracy, safety and finish.
Power-tec Power-tec - Gf5 Welding Clamp
Power-tec Power-tec - Gf5 Welding Clamp: 'L' welding clamp, manufactured for use in hard to reach areas. With 0-18mm adjustment.
Power-tec Power-tec - 58100s Tec Spot
Power-tec Power-tec - 58100s Tec Spot: Producing a professional grade finish ideal for any automotive workshop, the Tec Spot from Power-Tec is a comprehensive kit manufactured for the easy removal of dents and damage to automotive bodywork. Complete with everything you need for quick and easy dent pulling, the Tec Spot includes squigley wire, pulling pins, electrode accessories, earth and a slide hammer. Simply weld on the pulling pins and use the slide hammer to gently pull and massage the dents out of the bodywork, leaving a...
Power-tec Power-tec - Holder For 3 Point Electrode
Power-tec Power-tec - Holder For 3 Point Electrode: This 3 point electrode holder is a spare part for the Power-Tec Panel Medic panel repair kit which is used with spot welders or Power-Tec's Tec-Spot system for the easy removal of body panel dents and damage.
Power-tec Power-tec - Slide Hammer For Tec Spot Kit
Power-tec Power-tec - Slide Hammer For Tec Spot Kit: Replacement slide hammer for the Power-Tec Tec Spot bodywork repair kit.
Power-tec Power-tec - Glue Pads (6 Pack)
Power-tec Power-tec - Glue Pads (6 Pack): For use with the Power-Tec Gluematic Glue Gun, these glue pads are ideal for a wide range of applications and for being used with the Power-Tec glue puller system. In a pack of six these are great value for money.