Results for power tec power tec shrinking hammer
Power-tec Power-tec - Shrinking Hammer
Power-tec Power-tec - Shrinking Hammer: For a range of panel beating and bodywork repair applications.
Power-tec Power-tec - Slide Hammer For Tec Spot Kit
Power-tec Power-tec - Slide Hammer For Tec Spot Kit: Replacement slide hammer for the Power-Tec Tec Spot bodywork repair kit.
Power-tec Power-tec Shrinking Dolly
Power-tec Power-tec Shrinking Dolly: This Shrinking Dolly is made from top quality forged steel, heat treated under controlled conditions, ground and polished to a high standard.
Power-tec Power-tec - Monster Slide Hammer Kit
Power-tec Power-tec - Monster Slide Hammer Kit: At 7.5kg, the Monster Slide Hammer from Power-Tec is the heaviest of it's kind on the market today. Complete with various attachments for heavy repair work and controlled hammering. Included in the kit is straight & off-set 600mm long hammer extensions with 3 sizes of hammer heads, allowing for work in hard to reach areas. Also included are 5 sizes of heavy duty hook, straight and curved lip pullers, flexible connector and chain hook up plate for use with any pulling system.
Power-tec Power-tec - 58100s Tec Spot
Power-tec Power-tec - 58100s Tec Spot: Producing a professional grade finish ideal for any automotive workshop, the Tec Spot from Power-Tec is a comprehensive kit manufactured for the easy removal of dents and damage to automotive bodywork. Complete with everything you need for quick and easy dent pulling, the Tec Spot includes squigley wire, pulling pins, electrode accessories, earth and a slide hammer. Simply weld on the pulling pins and use the slide hammer to gently pull and massage the dents out of the bodywork, leaving a...
Power-tec Power-tec - 11 Piece Master Hammer Dolly Set
Power-tec Power-tec - 11 Piece Master Hammer Dolly Set: A comprehensive kit ideal for the professional automotive bodyshop, the master hammer dolly set from Power-Tec comes complete with a wide range of hammers, dollies and spoons manufactured for use on various panels around a vehicle and for various bodywork repair applications. A great value complete package, this set even comes with a useful heavy duty steel case for storage and organisation.
Power-tec Power-tec - Pullrite And Slide Hammer
Power-tec Power-tec - Pullrite And Slide Hammer: Easy to use, the Power-Tec PullRite is a clever piece of kit, designed to be used with squiggly wire to rough out panel damage. The PullRite simply hooks onto the squiggly wire after it has been welded to a panel, allowing for a firm, gentle pull to remove dents and dings. The PullRite can be pulled by hand, or by a slide hammer when a slightly firmer pull is needed.
Power-tec Power-tec - Holder For 3 Point Electrode
Power-tec Power-tec - Holder For 3 Point Electrode: This 3 point electrode holder is a spare part for the Power-Tec Panel Medic panel repair kit which is used with spot welders or Power-Tec's Tec-Spot system for the easy removal of body panel dents and damage.
Power-tec Power-tec - Glue Pads (6 Pack)
Power-tec Power-tec - Glue Pads (6 Pack): For use with the Power-Tec Gluematic Glue Gun, these glue pads are ideal for a wide range of applications and for being used with the Power-Tec glue puller system. In a pack of six these are great value for money.
Power-tec Power-tec - Airopower Standard Unit
Power-tec Power-tec - Airopower Standard Unit: The AiroPower from Power-Tec is a high power, high quality unit, ideal for all manner of automotive body work repairs. Capable of pushing or pulling up to 5.5 tons, yet compact enough to be operated single handedly, this is a must have for any automotive workshop. It can push or pull out large dents in body panels all around a vehicle and thanks to the supplied rubber pads and oil free, air operation there is no risk of further damage to body work, or interiors. An all round fantastic bit of...
Power-tec Power-tec 91643 - 50 Cma135t 1.5mm Twisted Aluminium Bits
Power-tec Power-tec 91643 - 50 Cma135t 1.5mm Twisted Aluminium Bits: A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec 91638 - 50 Cma132 1mm Aluminium Bits
Power-tec Power-tec 91638 - 50 Cma132 1mm Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - Small Rubber Pad
Power-tec Power-tec - Small Rubber Pad: A replacement small rubber pad for the Power-Tec Miracle system, specifically the Double Short Foot tool. Manufactured to protect both automotive bodywork and the tools itself from unnecessary and expensive damage.
Power-tec Power-tec - Large Rubber Pad
Power-tec Power-tec - Large Rubber Pad: A replacement large rubber pad for the Power-Tec Miracle system, specifically the single short line puller tool. Manufactured to protect both automotive bodywork and the tools itself from unnecessary and expensive damage.
Power-tec Power-tec 91640 - 50 Cma134 1mm Aluminium Bits
Power-tec Power-tec 91640 - 50 Cma134 1mm Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - Glue Sticks
Power-tec Power-tec - Glue Sticks: A pack of 15 REACH certified glue sticks manufactured for use with glue dent pulling systems, including the Power-Tec glue pulling system. Consumable item.
Power-tec Power-tec 91637 - 50 Cma131t 1.5mm Twisted Aluminium Bits
Power-tec Power-tec 91637 - 50 Cma131t 1.5mm Twisted Aluminium Bits: A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - 11 Piece Master Dolly Spoon Set
Power-tec Power-tec - 11 Piece Master Dolly Spoon Set: A comprehensive kit ideal for the professional automotive bodyshop, the master dolly spoon set from Power-Tec comes complete with a wide range of spoons, files and dollies manufactured for use on various panels around a vehicle and for various bodywork repair applications. A great value complete package, this set even comes with a useful heavy duty steel case for storage and organisation.
Power-tec Power-tec 91641 - 50 Cma134t 1mm Twisted Aluminium Bits
Power-tec Power-tec 91641 - 50 Cma134t 1mm Twisted Aluminium Bits: A pack of 50 1mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.
Power-tec Power-tec - Bodymate Push/pull Kit
Power-tec Power-tec - Bodymate Push/pull Kit: This lightweight Push/Pull kit from Power-Tec is easier to use and more practical than hydraulic body kits of this type. The tool requires no oil, so it is cleaner to use and it is also maintenance free, meaning you can concentrate on looking after your bodywork, rather than your tools. Complete with 9 accessories, this kit is ideal for a wide range of pushing and pulling applications.