Results for proxxon 28148 micro driver
Proxxon 28148 Micro-driver
Proxxon 28148 Micro-driver: Screwdriver Set / Series: Proxxon MICRO-Driver / Quantity: 15 Piece / Material of Tools: Chrome-Vanadium-Molydbenum-Steel
Proxxon 27100 Micro Compound Table Kt 70
Proxxon 27100 Micro Compound Table Kt 70: Proxxon-Micro-Compound-Table-Proxxon-27100-This-table-increases-the-functionality-of-the-MB-140-S-drill-stand-85-9962-Proxxon-27100-Micro-Compound-Table-Kt-70
Proxxon Micromot Micro Cutter Mic
Proxxon Micromot Micro Cutter Mic: The Proxxon Micromot MICRO Cutter MIC cuts materials up to 4mm thickness effortlessly and cleanly with a cutting width of only 0.5mm. It is ideal for cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foils and similar materials. Slim and light: A diameter of just 36mm makes the ergonomically shaped casing easy to handle. For fatigue-proof work and accurate guiding. A powerful DC special motor in this compact device ensures an astonishingly high cutting performance.
Proxxon Micromot Mp 300 Micro Shaper
Proxxon Micromot Mp 300 Micro Shaper: The Proxxon Micromot MP 300 MICRO Shaper has a powerful dust-protected motor with toothed belt drive, double ball-bearing spindle and a tool holder with triple slitted precision collets (includes 3 pieces for 2.4 - 3.0 and 3.2mm). The milling cutter height is adjustment by a hand wheel and the scale ring is adjustable to 0 (1 revolution = 1.0, 1 graduation line = 0.05mm). The Proxxon Micromot MP 300 MICRO Shaper has a stable aluminium table with longitudinal and angle stop as well as cutter...
Proxxon Micromot 28 652 Replacement Cutting Disc For Micro Cutter Mic
Proxxon Micromot 28 652 Replacement Cutting Disc For Micro Cutter Mic: Proxxon Micromot 28 652 Replacement Cutting Disc for MICRO Cutter MIC
El Colorado 80 L/arch A4 Red 28148 - 10 Pack
El Colorado 80 L/arch A4 Red 28148 - 10 Pack: FeaturesHigh Quality With Stylish Spine Labels And Internal Indexing. Covered In Wipe Clean Material. colourado 80mm lever arch A4 Red 28148. 10 Pack.
El Colorado 80 L/arch A4 Red 28148 - 10 Pack
El Colorado 80 L/arch A4 Red 28148 - 10 Pack: FeaturesHigh Quality With Stylish Spine Labels And Internal Indexing. Covered In Wipe Clean Material. colourado 80mm lever arch A4 Red 28148. 10 Pack.
Proxxon Micro-combispeeder (23124)
Proxxon Micro-combispeeder (23124): Ratchet Spanner Set, Spanner Set / Series: Proxxon MicroSpeeder / Material of Tools: Chrome Vanadium Steel / Material of Tool Box: Steel / Quantity: 6 Piece / Wrench Sizes: 10, 13, 16, 17, 18, 19 mm
Proxxon Micromot Pm 40 Precision Steel Vice
Proxxon Micromot Pm 40 Precision Steel Vice: The Proxxon Micromot PM 40 Precision Steel Vice is especially suited for filigree and accurate working with the MICRO miller MF 70 (812193) or the compound table KT 70 (823846). Sliding blocks and fixing screws included. Comes in a wooden box.
Proxxon Micromot 50/e Drill/grinder Set With Power Supply
Proxxon Micromot 50/e Drill/grinder Set With Power Supply: Proxxon MICROMOT drill/grinder 50/E. The set includes 34 industrial respectively dental quality bits and cutters: 1 diamond grinding bit, 1 fine miller, 0.5 and 1.0mm micro-drills, 1 brass brush, 4 high-grade corundum grinding bits (cylinder, sphere, disc and cone shaped), 1 saw blade, 4 grinding wheels (2 corundum, 2 silicon carbide), 20 cutting discs and 1 arbor. The 6 MICROMOT collets ranging from 1.0 â 3.2mm are also included. With mains adapter for 220 - 240V operation (12V, 1.0A).
Proxxon Micromot Fbs 240/e Precision Drill / Grinder
Proxxon Micromot Fbs 240/e Precision Drill / Grinder: The Proxxon Micromot FBS 240/E Precision Drill / Grinder is ideal for milling, grinding, polishing, brushing, removing rust, engraving and cutting. A great precision tool for delicate or small jobs which you can\'t do with a standard drill. The maximum speed of 20000rpm is continuously variable down to 5000rpm. The full wave electronic speed control results in virtually constant torque, even at lower speeds, in turn facilitating micro drilling, cleaning and polishing. The spindle runs in a...
Proxxon Micromot Fet Table Saw
Proxxon Micromot Fet Table Saw: The Proxxon Micromot FET Table Saw is ideal for cutting wood, non-ferrous metals, plastics, plexiglas, fibreglass reinforced sheets, foam and many other materials. Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium. The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 1/10 mm can be made after coarse adjustment using an adjusting screw. The height adjustable and 45° tiltable saw...
Proxxon 24419 Collet Chuck And Collets
Proxxon 24419 Collet Chuck And Collets: Proxxon PD400 Engineering Lathe System - Proxxon 24419, The Proxxon Collet Chuck and Collets are set for for accurate use on round components with the Proxxon PD400 lathe. The set includes one each of collet sizes 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10 and 12mm, as well as one soft collet for making your own customised size. These collets give concentric accuracy better than 0.2mm, much better than a chuck. The included collet attachment is mounted in the place of the headstock chuck. Proxxon 24419...
Proxxon 24402 Splash Guard/coolant Collector For Pf400
Proxxon 24402 Splash Guard/coolant Collector For Pf400: Proxxon PD400 Engineering Lathe System - Proxxon 24402, The Proxxon Splash Guard/Coolant Collector for PF400 is a chip collection tray for use with the Proxxon PD 400 lathe. Made from 1.25mm steel plate, powder coated, this part is designed to make seepage of the coolant impossible. Slopes on the front and rear of the tray make it easy to clean. Proxxon 24402 Splash Guard/Coolant Collector for PF400
Proxxon 24410 4-jaw Independent Chuck Pd400
Proxxon 24410 4-jaw Independent Chuck Pd400: Proxxon PD400 Engineering Lathe System - Proxxon 24410, The Proxxon 4-Jaw Independent Chuck PD400 is designed for use with the Proxxon PD 400 lathe, and can be used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and so centring is achieved manually. Proxxon 24410 4-Jaw Independent Chuck PD400
Proxxon 24412 Face Plate And Clamp Downs Pd 400 150mm
Proxxon 24412 Face Plate And Clamp Downs Pd 400 150mm: Proxxon PD400 Engineering Lathe System - Proxxon 24412, The Proxxon Face Plate and Clamp Downs PD 400 150mm is an accessory for the Proxxon PD 400 lathe system that can be used in the place of the standard chuck for larger and asymmetrical workpieces. It has a diameter of 130mm, with two through T-slots, as well as mounting clamps. Proxxon 24412 Face Plate and Clamp Downs PD 400 150mm
Proxxon Industrial 23349 Microclick Mc 30 Torque Wrench 6-30nm
Proxxon Industrial 23349 Microclick Mc 30 Torque Wrench 6-30nm: Proxxon Industrial MicroClick Torque Wrenches - Proxxon 23349, Proxxon Industrial MicroClick 6 - 30Nm Torque Wrench with reversing lever for clockwise and anticlockwise rotation. Automatic torque release gives clearly audible and physical click signal when selected torque is reached. Proxxon Industrial 23349 MicroClick MC 30 Torque Wrench 6-30Nm
Proxxon Industrial 23353 Microclick Mc 200 Torque Wrench 40-200nm
Proxxon Industrial 23353 Microclick Mc 200 Torque Wrench 40-200nm: Proxxon Industrial MicroClick Torque Wrenches - Proxxon 23353, Proxxon Industrial MicroClick 40 - 200Nm Torque Wrench with reversing lever for clockwise and anticlockwise rotation. Automatic torque release gives clearly audible and physical click signal when selected torque is reached. Proxxon Industrial 23353 MicroClick MC 200 Torque Wrench 40-200Nm
Proxxon Micromot 28 240 Diamond Grinding Bit 1.8mm
Proxxon Micromot 28 240 Diamond Grinding Bit 1.8mm: Proxxon Micromot Diamond-Coated Grinding Points - Proxxon 28 240, Proxxon Micromot Diamond-Coated Grinding Points have a consistently even coating of diamond dust. Their bodies and shafts made from stainless steel. Proxxon Micromot 28 240 Diamond Grinding Bit 1.8mm
Proxxon Micromot 28 222 Diamond Grinding Bit 1.8mm
Proxxon Micromot 28 222 Diamond Grinding Bit 1.8mm: Proxxon Micromot Diamond-Coated Grinding Points - Proxxon 28 222, Proxxon Micromot Diamond-Coated Grinding Points have a consistently even coating of diamond dust. Their bodies and shafts made from stainless steel. Proxxon Micromot 28 222 Diamond Grinding Bit 1.8mm