Results for ramblers end
Rambers End is a sympathetically-converted 16th century barn, set within the grounds of the owners? home in the village of Niton and can sleep two people. This all ground floor cottage has a king-size double bedroom with an en-suite shower room and an open plan living area with kitchen, dining area...
Click For Info
Ramblers Roost is a ground floor apartment in a former gentleman\'s residence a mile from Grasmere. There is a double bedroom, a bathroom and an open plan living area with kitchen, dining area and sitting area. Outside is off road parking for one car, and shared grounds including a small seating...
Click For Info
Ramblers Rest is a stone detached barn located outside the village of Abbotskerswell. The barn can sleep four people in one bedroom with double bed and a sofa bed in the living area. There is also a bathroom with shower, basin and toilet, a combined living, dining and kitchen area that is spacious...
Click For Info
Ramblers Retreat is a comfortable dog friendly holiday home on one level, in the quiet hamlet of Tresowes close to sandy beach of Praa Sands. Positioned adjacent to the owners? property the property has a private outlook. Sleeping three people it has one double en-suite bedroom, a single room and...
Click For Info
WAGO L-type End Module End Module 249 Series - Wago 249-142, WAGO 249-142 L-type End Module, end module. With rigid contact pin. Grey WAGO 249-142 L-type End Module End Module Grey 100pk
Click For Info
WAGO L-type End Module End Module 249 Series - Wago 249-145, WAGO 249-145 L-type End Module, end module. With rigid contact pin. Grey WAGO 249-145 L-type End Module End Module Grey 100pk
Click For Info
DSG-Canusa-Adhesive-Lined-Heatshrink-End-Cap-DSG-Canusa-END-CAP-25-0-9-0-P-Adhesive-lined-heat-shrinkable-Polyolefin-cable-end-cap-used-to-seal-the-ends-of-plastic-rubber-and-paper-insulated-cables-from-moisture-dirt-and-corrosion-P-DSG-Canusa-END-CAP-25-0-9-0-Adhesive-Lined-Heat-Shrink-End-Cap
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32700, The HellermannTyton 166-32700 LTS10-EI is a Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32701, The HellermannTyton 166-32701 LTS12-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32702, The HellermannTyton 166-32702 LTS16-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32703, The HellermannTyton 166-32703 LTS20-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32704, The HellermannTyton 166-32704 LTS25-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32705, The HellermannTyton 166-32705 LTS32-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton Conduit End Insert, LTS-EI Series Nickel Plated Brass - Hellermann Tyton 166-32706, The HellermannTyton 166-32706 LTS40-EI is an Conduit End Insert with a Liquid Tight Cover from the LTS-EI Range. The end insert has been manufactured from Nickel Plated Brass. The end insert when...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50805, The HellermannTyton 166-50805 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 54mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50804, The HellermannTyton 166-50804 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 42mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50803, The HellermannTyton 166-50803 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 34mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50802, The HellermannTyton 166-50802 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 28mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50801, The HellermannTyton 166-50801 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 21mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
HellermannTyton End Caps for Corrugated Conduits, PAEC Range, Black - Hellermann Tyton 166-50800, The HellermannTyton 166-50800 PAEC is a Rubber End Cap, ideal for use when a conduit is not terminated into an enclosure. The 16mm cap simply pushes over the end of the conduit, providing a smooth...
Click For Info
WAGO 1 Conductor Stackable Module 2020 Series - Wago 2020-267, WAGO 2020-267 with End Plate 2 conductor, DIN rail mount end module, colour - green-yellow. For wire sizes AWG 24-16. Pack size 250. WAGO 2020-267 with End Plate 2 Conductor End Module Green-yellow AWG 24-16 250pk
Click For Info
The Bontreger Satellite+ IsoZone BAr End Adapter. These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. Bontreger Satellite+ IsoZone BAr End Adapter Features Required for bar end use on Satellite Plus Isozone bars • For...
Click For Info
The ODI Lock-On End Caps. ODI Lock-On End Caps offer a one-piece bar end solution. These sturdy 6061 machined aluminum caps slide over the end of your bars and can even integrate directly with your Lock-On Grips, making them the ideal solution for Lock-On Grip users. They provided the highest level...
Click For Info
Wire end ferrule crimper with press-pressure setting and wire end ferrule set. Includes: 1. Wire end ferrule pliers with press-pressure adjustment. Wire end ferrules ranging from 0.5-6 mm². The force setting can be unlocked and the press jaws can be exchanged as needed. 2. Wire end ferrule set...
Click For Info
Knipex Front-Loading Self-Adjusting Crimping Pliers for End Sleeves (Ferrules) - Knipex 97 53 08, These front-loading Knipex Crimping Pliers for End Sleeves are self-adjusting to the desired end sleeve size. They fit all twin ferrules within the application range. The crimping pressure is already...
Click For Info
Stanley Ball End Hexagon Key Sets - Stanley 0-69-257, Stanley Ball Ended hexagon key set with standard Hexagon end on the short arm and ball end on the long arm. All keys are stored in a size marked plastic holder. Imperial ball end hexagon key set containing the following sizes1/16, 5/64, 3/32,...
Click For Info
Multi-end jewellers hammer Useful in striking blows in awkward places Ideal for lighter applications Includes 6 hammer options that\'s simple screw on Ball pein, dome, flat end, chisel end, plastic flat end and brass flat end
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31800, The HellermannTyton 166-31800 PCS10 is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 6.8mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31800...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31801, The HellermannTyton 166-31801 PCS12 is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 10.2mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31801...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31802, The HellermannTyton 166-31802 PCS16is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 13mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31802...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31804, The HellermannTyton 166-31804 PCS25is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 21.1mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31804...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31805, The HellermannTyton 166-31805 PCS32 is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 28.1mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31805...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31806, The HellermannTyton 166-31806 PCS40is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 37.6mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31806...
Click For Info
HellermannTyton End Insert, PCS-EI Series, Nickel Plated - Hellermann Tyton 166-31807, The HellermannTyton 166-31807 PCS50 is a Conduit End Insert from the PCS-EI Series. The end insert has a diameter of 48.4mm, and has been manufactured from Nickel Plated Brass (NPB). HellermannTyton 166-31807...
Click For Info
WAGO DIN Rail Terminal Blocks and End Plate, Spring Cage 7.5mm 30A - Wago 2006-1692, The WAGO DIN Rail Terminal Block Cover End, Spring Cage, Orange is a cover end and intermediate plate 1mm/0.039in thick. WAGO 2006-1692 1mm End and Intermediate Plate for 2006 Series Orange
Click For Info
Wieland fasis End Plates APFN 2.5/4/6/16 Blue/Green/Grey - Wieland 07.312.9455.6, This Blue End Plate APFN 4 D1/2/35 from Wieland is for the WKFN 4 D1/2/35 fasis duo feed-through terminal block and can easily be attached via the snap in feature. The thickness of the end plate is 1.5mm. Wieland...
Click For Info
RVFM Insulated Twin Cord End Ferrules - Rapid TCEF508F, The RVFM Twin Cord End Ferrules 0.5mm White (Pack of 100) are insulated twin cord ferrules designed to form a neat end termination to multi-strand cables and wires. Rapid TCEF508F Twin Cord End Ferrules 0.5mm White Pack of 100
Click For Info
RVFM Insulated Twin Cord End Ferrules - Rapid TCEF412F, The RVFM Twin Cord End Ferrules 4mm Grey (Pack of 100) are insulated twin cord ferrules designed to form a neat end termination to multi-strand cables and wires. Rapid TCEF412F Twin Cord End Ferrules 4mm Grey - Pack of 100
Click For Info
Wieland selos End Plates AP 4/6/10/16, Blue/Green/Grey for WK Terminal Blocks - Wieland 07.311.6655.0, This Grey End Plate APN 10 /V0 from Wieland is for the WKN 10/U selos terminal block and can easily be attached via the snap in feature. The thickness of the end plate is 1.5mm. Wieland...
Click For Info
Wieland fasis End Plates APFN 2.5/4/6/16 Blue/Green/Grey - Wieland 07.312.9255.0, This Grey End Plate APFN 4/35 from Wieland is for the WKFN 4/35 fasis duo feed-through terminal block and can easily be attached via the snap in feature. The thickness of the end plate is 1.5mm. Wieland 07.312.9255.0...
Click For Info